How to Adjust Auto Reverse on Garage Doors

The auto-reverse on your garage door is a safety measure that could prevent many kinds of injuries. The system is there to ensure the garage door retracts when it meets with an obstacle. You have seen the mechanism at work on the days when you wake up in the morning and the garage door is open. In this post, we aim to give you information on how to adjust auto reverse on garage doors. 

How to Adjust Auto Reverse on Garage Doors

If you have been irked by your garage’s failing efficiency, it’s time to do something about it. Let’s explore the solutions together.

How to Adjust Auto Reverse on Garage Doors

The Equipment

The mechanism often fails over simple fixes that don’t need much. All you need for this is a screwdriver and a step ladder.

Before you can start work on the garage door, it is important that you refrain from doing any serious repairs without the directions of a professional. You could easily worsen the problem if you should misalign any other parts as you repair the auto-reverse system. Professionals are trained to deal with garage door cables, insulation, and other issues that may arise. 

How to Adjust the Auto Reverse on Your Garage Door:

Find the opener controls

The first thing to do before anything else is to find the controls. Sometimes, the problem may only be about the controls and nothing serious at all. Get on a stepladder to get to the main section of the garage door opener’s motor. Here is where the controls are located for most garage door models. The setting you want to adjust is the closing-force adjustment. By fiddling with the screw or knob, you can adjust the closing force.

Change opener settings 

The problem may be that the door does not respond to the right amount of force to reverse. The knob you turn will adjust the amount of force. Move the screw one quarter in the counterclockwise direction. If you want the amount of force increased, you should turn the knob clockwise. Test the resistance force for your garage door as many times as you need until you are satisfied with the settings. You can always save yourself the trouble of adjusting the settings multiple times by just getting a professional to do it for you.

How to Adjust Auto Reverse on Garage Doors

Test how the door closes

Now that you have adjusted the force for the auto-reverse feature, you ought to make sure the door closes all the way down with no objections. Check whether there is a gap between the floor and the door. If it reverses by itself, it also needs to be readjusted.

Get an Expert as Soon as You Can 

You may try to fix the door unsuccessfully but you shouldn’t insist on a trial and error approach. Get a professional garage repair service to take care of any garage door malfunctions that need specialized tools to correct. 

Your garage door will develop some problems, it and it helps to know what to do about some of these issues. Now that you know how to adjust auto reverse on garage doors, ensure that your garage door is not a safety hazard to you and your family.

Types of Garage Door Insulation

Have you ever look at your electricity bill and get surprised? Well, it is quite common to get a higher bill than expected if your garage is not properly insulated. Garage is one of the main parts of your house. The heat and cold waves can enter into your house through this if you do not take proper precautions. The most important and effective way to keep the temperature perfect is by insulating the garage door. There are different types of garage door insulation that you can opt for.

Types of Garage Door Insulation

If you want to control your electricity bill and reduce the amount of money you spend on it, as well as solve some problems you may have with your garage, then you need to get the insulation done for your garage door. Insulation can be of different types and it has different effects.

Types of Insulation

Here are some of the insulation types that you can choose for your garage door:

  1. Reflective foil

Though this type of insulation is not much attractive and appealing in nature, the reflective foil is highly effective at keeping the heat out in the summer. This insulation is available in rolls. The thickness of the foil is around an inch or a half. This is available in both double as well as single foil. It consists of one or two layers of polyethylene foam which is located between the two films of the aluminum foil. 

Types of Garage Door Insulation
  1. Polystyrene foam

Polystyrene foam is a great option for insulation of your garage door. But they offer less flexibility than that of the reflective foil. Instead, it is sold in large sheets that you can cut according to your own need to fit it in the panel of your garage door

  1. Panel kits

Panel kits have 8 pre-cut fiberglass panels or plastic laminated polystyrene panels that can easily fit inside the channels of the garage door frame. 

Benefits of installing insulation

Insulating the garage door is a great idea if you want your electricity bill and utility bills to get reduced. Besides making the garage safer and more comfortable, it will also prevent the cold or hot winds to enter into the house through the garage. You can keep your house comfortably cool in summer and cozy warm in winter with the help of insulation. Colder or hotter drafts can make your house uncomfortable. You have to choose a garage door insulation kit based on weight and the R-value.

Bottom lineSo, these are the different types of garage door insulation that you have to consider for your garage. Of course, the garage door plays a major role in keeping your car safe. But the main issue is that every time you open or close the door of your garage, drafts can enter into your house, especially if your alignment is off. Also, these cold or warm drafts can make your house uncomfortable. It will also make your HVAC system to work more to keep your house in the comfortable temperature. Thus, this can increase the utility bill to a great extent. To make sure you are avoiding such cases, you are installing the insulation as soon as possible.

Types of Garage Door Hinges

There are different types of garage door hinges. They all differ in terms of size, gauge and intended application. While there are different manufacturers of garage door hinges, they all use standard classification for their products, making it easy for buyers to find an exact match to suit their needs and budget. 

Types of Garage Door Hinges

Types of Garage Door Hinges

In this guide we will take a look at the different types of hinges commonly used for garage doors. These include those used for commercial and residential garage doors, as eventually they can become a problem that needs to be replaced. We will consider classification of hinges by gauge, application and material. 

Garage Door Hinge Gauges

Garage door hinges are mostly sold in either of two popular gauges: 11-gauge and 14-gauge. 11-gauge hinges are recommended for commercial kind of garages while 14-gauge hinges are ideal for residential garages. As you can deduce, the designation of gauge numbers for garage door hinges is counter-intuitive. The lower the gauge number, the thicker the door hinge is. Thin gauge door hinges such as gauge-18 are cheaper but they will be a liability in the long term as they may break and require costly repairs and replacement. For residential purposes, do not go for a garage door hinge that has a gauge number higher than 15 for safety reasons

Types of Garage Door Hinges by Application

Different types of hinges are designed for different kinds of garage doors. When classified by application, there are 5 different kinds of garage door hinges. These are:

  • Residential Garage Door Hinges
  • Commercial Garage Door Hinges
  • Full Vision Garage Door Hinges
  • Truck Door Garage Door Hinges
  • Narrow Body Garage Door Hinges

It is important to keep in mind that one garage door may require different kinds of hinges. Indeed, most garage doors come with a stamped number (different from the gauge) which is usually depicts which part of the garage door you should install it on. Garage door hinges meant for residential purposes have stamped part numbers ranging from 1 to 5. Owing to the larger sizes of commercial garage doors, the part numbers run from 6 to 10. 

If the hinge is to be installed higher up a garage door, you need to look for a high part number as the hinge will be thick enough to support the extra weight. Low numbered hinges are suitable for garage door parts together but higher numbered ones have enough strength to also support garage door rollers. 

Garage Door Hinges by Material

Garage doors can also be classified by the material from which they are made. The most popular material is galvanized stainless steel but it is also common to find garage door hinges made of brass, copper, bronze, cast iron or pewter. Many hinges come with a metallic finish but some may be powder coated to blend in with the rest of the garage door. 

In Conclusion

Just like garage door dents, you need to know hinges and what kind you need to repair or replace yours with. While there are different types of garage door hinges you can buy for your home or commercial garage, the use of standard classification makes it easy to select the ones which are most appropriate. Whichever your choice though, it is important to ensure that the hinges are strong enough to support the weight of the garage doors and that they are designed to withstand the wear and corrosion which come with extended use.

Parts of a Garage Door Frame

The garage door is surely one of the most important parts of your house. It is solely responsible for keeping your personal goods and vehicles safe all the time. If your garage door is having any problems, then you can troubleshoot the garage door problem on your own too. But for that, you need to have proper knowledge of the different parts of a garage door frame. 

Parts of a Garage Door Frame

Parts of a Garage Door Frame 

If you are looking for a detailed report on the different parts of your garage door frame and their functions, then you are at the right place. Read below to know details about how garage door functions and the parts that play a vital role in its proper functioning.

  1. Tracks

The tracks include both trolley track and door track. The door tracks along both the side of the door. It guides for the rollers located on the door so that the pulley system can easily let the door go up and down. The trolley track has a chain on it which can move the door up and down using the electric garage door operator.

  1. Jamb and Flag Brackets

These two are the hardware pieces that are attached to the track of the wall as well as ceiling. It provides a great support for the tracks and to the garage door also. 

  1. Hanger Kit

The hanger kit is made up of pieces of galvanized steel which contains pre-punched holes in them. These holes can be used for attached the electric door operator to the garage’s ceiling and the tracks to the ceiling. They are available in unassembled way so that you can adjust the height as per your needs.

  1. Bottom Rail

The bottom rail is a horizontal rail of your garage door which is located at the lowermost section. If your garage floor is not even, then having this on the bottom of the garage door can be a real problem. This can allow the water and dust or debris to enter into your garage.

  1. Rollers

These are one of the moving parts which are also known as the wheels. These are located on either sides of the garage door. They sit right in the door tracks and enable the door to open or shut smoothly.

  1. Hinges

Though small in size, this moving part of the garage door plays a vital role. It enables the garage door to bend in order to store it while opening the door.

  1. Pulley and Cables

The cables are attached to both the springs and the electric garage door operator. This can lift the door upward so that you can open the door easily. 

In Conclusion

So, these are the important and inevitable parts of a garage door frame. When there is a problem with the garage door, it has to be one of these parts that is causing the main issue in closing or opening. You need to diagnose the problem or you can also call for a professional in that case if your garage is stuck or you have a different issue. Regardless, it’s important to follow proper safety tips to ensure that you’re handling the situation safely. 

Garage Door Cables Keep Coming Off

The garage door will not work properly if the cable slips off the drum. The springs and cables on your garage door work together to keep the garage door functional. Garage door cables experience wear and tear over time. This can be a problem for the smooth operation of the garage doors. If your garage door cables keep coming off, then there can be different reasons behind it. 

Garage Door Cables Keep Coming Off

Garage Door Cables Keep Coming Off

Cables are sometimes involved when it comes to garage door problems. Whether your garage door is stuck, or isn’t closing properly, here are some of the problems and solutions when it comes to garage door cables.

Reasons Behind Cable Drum Slip

As mentioned above, there are different reasons why your cable drum will slip. The garage door will open when only the springs in it will apply the right amount of tension to your cables. Proper functioning of the cable helps in lifting the door and spool on the drums. These cables can slip off your rollers. If this happens then the cable can get loose. Here are some of the reasons why your cable can start malfunctioning:

Torsion Spring Busted 

Some of the garage doors come with two torsion springs. But the others have only one. In case the spring breaks, these cables will lose the tension. It will unwind from the drum. The door can come crashing down if it happens. But a door that comes with two torsion springs will likely not crash down.

Door Hitting an Object

With the photo safety eyes and auto-reverse mechanisms, it is easier to keep the door from falling on objects below or close suddenly. But if these safeguards do not work properly or even if your system is old, then the door can shut down. This can happen when the cable gets loose.

Spring with Wrong Amount of Tension

The amount of spring tension completely depends on different sizes of the doors. Springs are tensioned while they are installed. But if the tension is not properly done, then the chances are higher that it will make the cable to get loose. Once the cable gets loose enough, it will unwind and fall off. This can also cause a garage door to be unaligned.

Wrong Size of the Drums or Cables

When the door is heavier, it will require heavier cables. A cable which is too small for the drum or the door will be strained. It can easily get weak and break off too causing door to crash down. You need to make sure that you are using the right size of the drums and cables for your garage door.

Final Words

So, these are some of the reasons why your garage door cables keep coming off. You need to make sure that all the above mentioned points are kept in mind while installing the garage door

Garage Door Dent Solutions

A damaged garage door can be a major inconvenience. While it may not seem like a big deal, it could lower your home’s curb appeal, especially if you’re planning to put your house on the market. Homebuyers love the curb appeal. If a potential buyer sees a dented garage door, for example, they’re likely to believe that there are other things in your home that are neglected as well. Here are a few garage door dent solutions to consider.

Garage Door Dent Solutions

Fixing small dents in your garage door is mostly a quick and easy fix, whether you choose to do it yourself or hire a professional. But, it is always important to complete it safely

DIY Garage Door Dents Repair

Repairing dents in your garage door rarely requires specialized tools. The chances are you already have all the materials you’ll need around the house. There are several methods of fixing dents. Choose a method based on the materials you have at home.

Garage Door Dent Solutions

Method 1

You’ll need a rubber mallet, wooden block, paint and primer, patching material, fine-grit sandpaper, and putty knife.


  • Wash the area with detergent and warm water then give it ample time to dry fully.
  • Place the wooden block over the dent and even out the dent by tapping it with the mallet
  • Sand the area to make sure it’s even
  • Use patching material to cover the dented area and make it even using a putty knife. Give it some time to dry before sanding it down again.
  • Apply the primer, let it dry and then paint.

Method 2

You’ll need a heat source, aluminum foil, and compressed air.


  • Wash the area with warm water and detergent and give it ample time to dry completely
  • Cover the dented area with a strip of aluminum.
  • Heat up the foil evenly using the heat source
  • After about a minute, remove the foil and spray the dented area with compressed air for about 30 seconds.

Both methods are easy to do. If the dent is substantial, however, DIY solutions may not be enough

Get a Professional 

When you have dents in your garage and the solutions mentioned don’t seem to help, consider seeking professional help.

Whether you have dents in your garage or need other door repairs, consider hiring a professional door repair company or technician. You want to hire an experienced company with the necessary knowledge to do the job right. Typically, a technician will diagnose your problem, suggest the best solution and give you a quote to fix the dent.

Bottom Line

Once you’ve selected the best option, you can expect the technician to effectively complete the repair. Dents can be a small issue but they can easily escalate into major problems. When you’re dealing with a dented garage door, consider these garage door dent solutions. Make your choice based on the tools at your disposal and don’t be afraid to hire professionals when necessary. With the tips mentioned, a dented garage door shouldn’t be a cause for worry. With the right tools, you can have your garage door back to normal in no time.

Garage Door Stuck on One Side

Imagine coming home after a long day only to find that your garage door isn’t working as it should. Your garage door can get jammed for a wide range of reasons. If your garage door stuck on one side, here are some garage door items you should inspect and their possible fixes.

Garage Door Stuck on One Side

Are you having problems with your garage door? If it is stuck on one side, this article will give you just the solution. From a broken garage spring to an off-track garage, this article will give you tips to fix your stuck garage door.

Lodged Garage Door Track

A jammed garage door can result from something as simple as an obstruction in the track. Check to see if there’s anything lodged in the track that could be preventing the door from opening or closing fully. You can quickly fix the issue by removing the object from the track. Dirty tracks can also cause the door to jam. You can clean the tracks with an alcohol-soaked rug. Exercise caution when cleaning as the metal edges can be sharp.

It also helps to check the tracks for bumps, warping or dents. You can fix any dents or bumps by placing a wooden block against the track and knocking it with a hammer. If the track appears too damaged to bend back into shape, hire a garage door specialist to replace the track and conduct any other necessary maintenance.

Make Sure Your Garage Door Isn’t Locked

Some garage doors feature a “full lock” system that enables anyone to lock the garage door from the outside just by turning a handle. This means that anyone could have turned the handle and unknowingly locked the door, causing it to jam as you try to open it. All you need to do in this case is to unlock the garage door and things should be back to normal.

Broken Garage Door Springs

Check whether your garage door springs are broken. There are two different types of springs. If the springs are located on either side of the door, they’re referred to as extension springs. Check to see whether the springs are hanging on the side of the garage door which indicates that they are broken. Springs located horizontally at the top of the garage door are referred to as torsion springs. You’ll know they’re broken if there’s a gap between the springs.

Replacing garage door springs can be dangerous so be sure to hire professionals for the job.

Garage Door Is Off Track

Your garage door may drop out of its guide track when you try to open or close the door too quickly or open or close the door from one side rather than in the middle. Check the garage door rollers to confirm that they’re on the track. You also want to confirm that the garage door panels are not damaged. Damaged panels need to be repaired or replaced. Similarly, rollers that are off track need to be put back on the track by a professional.

Repairing your damaged garage door can be extremely dangerous. As such, don’t attempt to fix garage door stuck on one side unless you know what you’re doing. If you’re in doubt, seek professional help.

How to Fix Garage Door Alignment – Tips from the Pros

When a garage door is out of alignment, it can cause a ton of frustration. It can become jammed and stop working mid open or close, which is a nightmare during a time sensitive moment like when you’re going to work or taking the kids to school. Even though it is always recommended to have a professional who knows how to fix garage door alignment, it is possible to fix at home.

How to Fix Garage Door Alignment

How to Fix Garage Door Alignment

Don’t know how to fix garage door alignment? The first things to check are the garage door springs and cables, see if the obstacle is on the track, then adjust the track hardware and position of the track.

Why Does a Garage Door Get Misaligned?

A garage door can become off of it’s alignment for a few reasons. When it is used frequently and the hardware becomes worn and loosened up or if the garage door has been recently hit, the alignment can be off.

Not fixing an unaligned garage door can be dangerous in the event that the door falls of the tracks and onto someone or if it wont close and leaves your home vulnerable to a break in.

First Things to Check

Garage door springs and cables – the springs and cables that use tension to open and close the garage door can become loose, out of place, ripped or broken. These fixtures should be checked first to see if the cables can be easily moved back into place. If not, a professional can repair or place the broken or ripped cables for anywhere around $150 to $200.

Obstacle on track – The path along the track should be checked for any obstructions, dents or debris that could be causing some kind of blockage or malfunction. Debris and blockages are easy to clean out, however dents in the tracks need adjustment, which will require more muscle work (or money, if you want a specialist to fix it).

Fix a Binding Garage Door

A garage door that is bound is one that seems impossible to move out of position either up or down.

Adjusting the track hardware Check along the track to find any loosened screws that need to be tightened up. It is also possible for screws to be tightened through constant vibrations of the garage door usage. Loosen the ones that seem to be so tight that they are warping the track.  

Adjusting the Position of the TrackWith a rubber mallet, tap along the bottom of the track to get it back into position. After this, use a leveler to make sure that the track is going straight up and down.

Other Damages To Check

Rust – Due to various weather conditions, exposure to chemicals and multiple uses, a garage door can become molded, rusted or damaged to the point that the door is not operating correctly. It is best to have this replaced by a professional. Hardware like the hinges should be checked for rust and damages as well through frequent maintenance. These may be easier to fix by the owner, however it does take some muscle and maybe more than one person to handle.

Old Parts –  If the home is old and the garage hasn’t been upgraded in a very long time (if at all), then some of the parts may bee to be replaced, If more than just two fixtures are damaged beyond repair, a specialist may suggest that it is time to replace all the garage door fixtures, technology and details.

In Conclusion

If a garage door is not repaired when it is off it’s tracks and needs a realignment, the situation can become worse and possibly injure someone. It is important to either know how to fix garage door alignment, what to check for or when it is the appropriate time to call an expert to come take a look.

Garage Door Safety Tips

Did you know that there are basic garage door safety tips you can follow to keep your family safe? There are many injuries reported every year that are related to garage doors. These injuries are caused by poor installation, operation, and maintenance of these garage doors.

Garage Door Safety Tips

Garage Door Safety Tips

In order to prevent possible injury or damages, it’s important to be aware of safety measures when it comes to garage doors. To help you protect your family from these injuries, below are 7 garage door safety tips you can follow.

1. Keep Garage Door Remotes Away from Children

Kids are usually playful and they may get tempted to play near the garage door if they get access to the remote controls. Ensure your remote is locked up in places where your kids cannot access them. You should also warn them about the risks of playing with the remote controls and why they need to play away from the garage door.

2. Watch your Fingers

If your hands get caught between the garage door sections you can get injured. So teach your kids to keep their fingers and hands away from the door sections when closing it. For garage doors that are operated manually, ensure you use the lift handles when opening or closing the door. If you are fitting a new garage door, consider getting an electric garage door opener or one that has pinch protection.

3. Never go Under a Moving Garage Door

You should never, at any instance, walk or run under a closing garage door. That would be calling for trouble as you can easily get crushed! If you want to exit your home through the garage door, it’s advisable to install keypad openers. These can help you open or close the door from the outside so you won’t have to run under it. If you have kids that you think may be tempted to race under the garage door, ensure you fit sensors in your door. Sensors usually stop the door whenever someone tries to pass under it.

4. Regular Inspections

The best way to prevent potential hazards in your garage is by conducting inspections preferably after every month. You should check that all the garage door parts are working perfectly. This includes gears, cables, and sensors. Also consider doing annual maintenance. A professional technician should help you replace any worn out parts or those that are broken. This will ensure your garage door is in perfect condition and it will reduce risks of accidents.

5. Hire a Professional

You should never try to install a garage door, or even repair damaged gears or cables. While it may seem an easy job for handy homeowners, it is usually a very risky task. Garage doors are usually heavy, and the springs and cable are under extreme tension from the weight. A small mistake when handling them can easily cause severe injury and sometimes death. You should, therefore, leave this task to be handled by a qualified technician.

6. Test the Auto-reverse Sensitivity

Garage doors are created with an auto-reverse mechanism that makes the door to change direction when it comes into contact with a person or object. In case the door does not reverse when it meets an object, then its opener’s sensitivity might have been set wrongly. And this is a recipe for disaster!

You can test for reversing sensitivity by opening your garage door and then placing an object like a broom on its way. The door should reverse when it comes into contact with the broom.

If your door doesn’t reverse you need to check your manual to guide you on how to adjust it. Alternatively, you can call your technician for assistance.

7. The Six-inch Rule

Garage door safety beams, which detect objects under the door, should be installed not upwards of six inches from the garage floor. Placing these photoelectric eyes beyond this distance may make objects under the door to go undetected by the safety beams, which can get them crushed. Also, ensure your door is installed with this safety feature.

To Summarize

You don’t have to remove your garage door in order to keep your family safe. The above garage door safety tips will keep your garage from being damaged and help you keep your family safe from injuries.

Garage Door Panel Sizes

Where do you start when contemplating how to redesign or build a detached garage? You can imagine the style and color that will correlate with that of your home. There is also the mechanics and opening systems that you will have to research to identify the best brand that fits you. While these will take some discussion with a professional or a contractor, you can start with something as basic as garage door panel sizes or what size garage door you will need to best fit your lifestyle.

Garage Door Panel Sizes

Garage Door Panel Sizes

In general, the measurements for garage door widths range from 8-to-18 feet. Customized garage doors can go up to 20+ feet to accomodate for a three or four car garage. In terms of height, garage doors will customarily be about seven feet tall and can be as high as 10 feet.

Car Garage Doors

Depending on the number of cars you own, you will also need to determine if you need one single door, two single doors, a double door or a combination of these. For homeowners who only have one car, it is only necessary to have a single door garage, which will be about 8-to-10 feet wide.

Those who are customizing their garage to fit two or more cars have many options. Garages that are holding two cars have the options of either two single garage doors that are about 10 feet each, or a wide double garage door about 16-to-18 feet. People who opt for two single garage doors generally do so for aesthetics. However, having two single garage doors can be a nuisance for two reasons. First, the extra gap between the doors will allow more cold air to enter the garage, which can damage your car when living in extremely cold weather conditions. The second reason people run into problems with two single doors is the extra motor and other accessories that are needed to be installed or purchased.

Homes with two or more cars will need a double garage door that will usually be about 18 feet wide. One wide double garage door will allow more insulation to keep the cars at a comfortable temperature. Also, with only one garage door you will just need one motor to accommodate the garage system as a whole.

RV Garage Doors

As previously mentioned, the highest a standard garage door will measure up to will be about 10 feet tall. It is possible, however, to customize a door to adjust to the height of an Recreational Vehicle (RV).

Garages that are specifically made to fit RV’s will need a garage door which is about 14 feet wide and 16 feet tall. As long as the RV doesn’t have any special customizations like a lift or any appendages that stick out too much, the standards for RV garage doors should fit perfectly.

In Conclusion

Whether you are building a detached garage from the bottom up or you plan on redesigning your current connected garage doors, the basic measurements of garage door panel sizes is a good place to start. You can measure your current garage opening yourself and get the right fitting door for you. Asking a professional on which garage door sizes and styles are best for you is always recommended.